OwlCyberSecurity - MANAGER

Edit File: nvme-fc-driver.h

/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2016, Avago Technologies */ #ifndef _NVME_FC_DRIVER_H #define _NVME_FC_DRIVER_H 1 #include <linux/scatterlist.h> /* * ********************** LLDD FC-NVME Host API ******************** * * For FC LLDD's that are the NVME Host role. * * ****************************************************************** */ /** * struct nvme_fc_port_info - port-specific ids and FC connection-specific * data element used during NVME Host role * registrations * * Static fields describing the port being registered: * @node_name: FC WWNN for the port * @port_name: FC WWPN for the port * @port_role: What NVME roles are supported (see FC_PORT_ROLE_xxx) * @dev_loss_tmo: maximum delay for reconnects to an association on * this device. Used only on a remoteport. * * Initialization values for dynamic port fields: * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must * be set to 0. */ struct nvme_fc_port_info { u64 node_name; u64 port_name; u32 port_role; u32 port_id; u32 dev_loss_tmo; }; /** * struct nvmefc_ls_req - Request structure passed from NVME-FC transport * to LLDD in order to perform a NVME FC-4 LS * request and obtain a response. * * Values set by the NVME-FC layer prior to calling the LLDD ls_req * entrypoint. * @rqstaddr: pointer to request buffer * @rqstdma: PCI DMA address of request buffer * @rqstlen: Length, in bytes, of request buffer * @rspaddr: pointer to response buffer * @rspdma: PCI DMA address of response buffer * @rsplen: Length, in bytes, of response buffer * @timeout: Maximum amount of time, in seconds, to wait for the LS response. * If timeout exceeded, LLDD to abort LS exchange and complete * LS request with error status. * @private: pointer to memory allocated alongside the ls request structure * that is specifically for the LLDD to use while processing the * request. The length of the buffer corresponds to the * lsrqst_priv_sz value specified in the nvme_fc_port_template * supplied by the LLDD. * @done: The callback routine the LLDD is to invoke upon completion of * the LS request. req argument is the pointer to the original LS * request structure. Status argument must be 0 upon success, a * negative errno on failure (example: -ENXIO). */ struct nvmefc_ls_req { void *rqstaddr; dma_addr_t rqstdma; u32 rqstlen; void *rspaddr; dma_addr_t rspdma; u32 rsplen; u32 timeout; void *private; void (*done)(struct nvmefc_ls_req *req, int status); } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ enum nvmefc_fcp_datadir { NVMEFC_FCP_NODATA, /* payload_length and sg_cnt will be zero */ NVMEFC_FCP_WRITE, NVMEFC_FCP_READ, }; /** * struct nvmefc_fcp_req - Request structure passed from NVME-FC transport * to LLDD in order to perform a NVME FCP IO operation. * * Values set by the NVME-FC layer prior to calling the LLDD fcp_io * entrypoint. * @cmdaddr: pointer to the FCP CMD IU buffer * @rspaddr: pointer to the FCP RSP IU buffer * @cmddma: PCI DMA address of the FCP CMD IU buffer * @rspdma: PCI DMA address of the FCP RSP IU buffer * @cmdlen: Length, in bytes, of the FCP CMD IU buffer * @rsplen: Length, in bytes, of the FCP RSP IU buffer * @payload_length: Length of DATA_IN or DATA_OUT payload data to transfer * @sg_table: scatter/gather structure for payload data * @first_sgl: memory for 1st scatter/gather list segment for payload data * @sg_cnt: number of elements in the scatter/gather list * @io_dir: direction of the FCP request (see NVMEFC_FCP_xxx) * @sqid: The nvme SQID the command is being issued on * @done: The callback routine the LLDD is to invoke upon completion of * the FCP operation. req argument is the pointer to the original * FCP IO operation. * @private: pointer to memory allocated alongside the FCP operation * request structure that is specifically for the LLDD to use * while processing the operation. The length of the buffer * corresponds to the fcprqst_priv_sz value specified in the * nvme_fc_port_template supplied by the LLDD. * * Values set by the LLDD indicating completion status of the FCP operation. * Must be set prior to calling the done() callback. * @transferred_length: amount of payload data, in bytes, that were * transferred. Should equal payload_length on success. * @rcv_rsplen: length, in bytes, of the FCP RSP IU received. * @status: Completion status of the FCP operation. must be 0 upon success, * negative errno value upon failure (ex: -EIO). Note: this is * NOT a reflection of the NVME CQE completion status. Only the * status of the FCP operation at the NVME-FC level. */ struct nvmefc_fcp_req { void *cmdaddr; void *rspaddr; dma_addr_t cmddma; dma_addr_t rspdma; u16 cmdlen; u16 rsplen; u32 payload_length; struct sg_table sg_table; struct scatterlist *first_sgl; int sg_cnt; enum nvmefc_fcp_datadir io_dir; __le16 sqid; void (*done)(struct nvmefc_fcp_req *req); void *private; u32 transferred_length; u16 rcv_rsplen; u32 status; } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ /* * Direct copy of fc_port_state enum. For later merging */ enum nvme_fc_obj_state { FC_OBJSTATE_UNKNOWN, FC_OBJSTATE_NOTPRESENT, FC_OBJSTATE_ONLINE, FC_OBJSTATE_OFFLINE, /* User has taken Port Offline */ FC_OBJSTATE_BLOCKED, FC_OBJSTATE_BYPASSED, FC_OBJSTATE_DIAGNOSTICS, FC_OBJSTATE_LINKDOWN, FC_OBJSTATE_ERROR, FC_OBJSTATE_LOOPBACK, FC_OBJSTATE_DELETED, }; /** * struct nvme_fc_local_port - structure used between NVME-FC transport and * a LLDD to reference a local NVME host port. * Allocated/created by the nvme_fc_register_localport() * transport interface. * * Fields with static values for the port. Initialized by the * port_info struct supplied to the registration call. * @port_num: NVME-FC transport host port number * @port_role: NVME roles are supported on the port (see FC_PORT_ROLE_xxx) * @node_name: FC WWNN for the port * @port_name: FC WWPN for the port * @private: pointer to memory allocated alongside the local port * structure that is specifically for the LLDD to use. * The length of the buffer corresponds to the local_priv_sz * value specified in the nvme_fc_port_template supplied by * the LLDD. * @dev_loss_tmo: maximum delay for reconnects to an association on * this device. To modify, lldd must call * nvme_fc_set_remoteport_devloss(). * * Fields with dynamic values. Values may change base on link state. LLDD * may reference fields directly to change them. Initialized by the * port_info struct supplied to the registration call. * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must * be set to 0. * @port_state: Operational state of the port. */ struct nvme_fc_local_port { /* static/read-only fields */ u32 port_num; u32 port_role; u64 node_name; u64 port_name; void *private; /* dynamic fields */ u32 port_id; enum nvme_fc_obj_state port_state; } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ /** * struct nvme_fc_remote_port - structure used between NVME-FC transport and * a LLDD to reference a remote NVME subsystem port. * Allocated/created by the nvme_fc_register_remoteport() * transport interface. * * Fields with static values for the port. Initialized by the * port_info struct supplied to the registration call. * @port_num: NVME-FC transport remote subsystem port number * @port_role: NVME roles are supported on the port (see FC_PORT_ROLE_xxx) * @node_name: FC WWNN for the port * @port_name: FC WWPN for the port * @localport: pointer to the NVME-FC local host port the subsystem is * connected to. * @private: pointer to memory allocated alongside the remote port * structure that is specifically for the LLDD to use. * The length of the buffer corresponds to the remote_priv_sz * value specified in the nvme_fc_port_template supplied by * the LLDD. * * Fields with dynamic values. Values may change base on link or login * state. LLDD may reference fields directly to change them. Initialized by * the port_info struct supplied to the registration call. * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must * be set to 0. * @port_state: Operational state of the remote port. Valid values are * ONLINE or UNKNOWN. */ struct nvme_fc_remote_port { /* static fields */ u32 port_num; u32 port_role; u64 node_name; u64 port_name; struct nvme_fc_local_port *localport; void *private; u32 dev_loss_tmo; /* dynamic fields */ u32 port_id; enum nvme_fc_obj_state port_state; } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ /** * struct nvme_fc_port_template - structure containing static entrypoints and * operational parameters for an LLDD that supports NVME host * behavior. Passed by reference in port registrations. * NVME-FC transport remembers template reference and may * access it during runtime operation. * * Host/Initiator Transport Entrypoints/Parameters: * * @localport_delete: The LLDD initiates deletion of a localport via * nvme_fc_deregister_localport(). However, the teardown is * asynchronous. This routine is called upon the completion of the * teardown to inform the LLDD that the localport has been deleted. * Entrypoint is Mandatory. * * @remoteport_delete: The LLDD initiates deletion of a remoteport via * nvme_fc_deregister_remoteport(). However, the teardown is * asynchronous. This routine is called upon the completion of the * teardown to inform the LLDD that the remoteport has been deleted. * Entrypoint is Mandatory. * * @create_queue: Upon creating a host<->controller association, queues are * created such that they can be affinitized to cpus/cores. This * callback into the LLDD to notify that a controller queue is being * created. The LLDD may choose to allocate an associated hw queue * or map it onto a shared hw queue. Upon return from the call, the * LLDD specifies a handle that will be given back to it for any * command that is posted to the controller queue. The handle can * be used by the LLDD to map quickly to the proper hw queue for * command execution. The mask of cpu's that will map to this queue * at the block-level is also passed in. The LLDD should use the * queue id and/or cpu masks to ensure proper affinitization of the * controller queue to the hw queue. * Entrypoint is Optional. * * @delete_queue: This is the inverse of the crete_queue. During * host<->controller association teardown, this routine is called * when a controller queue is being terminated. Any association with * a hw queue should be termined. If there is a unique hw queue, the * hw queue should be torn down. * Entrypoint is Optional. * * @poll_queue: Called to poll for the completion of an io on a blk queue. * Entrypoint is Optional. * * @ls_req: Called to issue a FC-NVME FC-4 LS service request. * The nvme_fc_ls_req structure will fully describe the buffers for * the request payload and where to place the response payload. The * LLDD is to allocate an exchange, issue the LS request, obtain the * LS response, and call the "done" routine specified in the request * structure (argument to done is the ls request structure itself). * Entrypoint is Mandatory. * * @fcp_io: called to issue a FC-NVME I/O request. The I/O may be for * an admin queue or an i/o queue. The nvmefc_fcp_req structure will * fully describe the io: the buffer containing the FC-NVME CMD IU * (which contains the SQE), the sg list for the payload if applicable, * and the buffer to place the FC-NVME RSP IU into. The LLDD will * complete the i/o, indicating the amount of data transferred or * any transport error, and call the "done" routine specified in the * request structure (argument to done is the fcp request structure * itself). * Entrypoint is Mandatory. * * @ls_abort: called to request the LLDD to abort the indicated ls request. * The call may return before the abort has completed. After aborting * the request, the LLDD must still call the ls request done routine * indicating an FC transport Aborted status. * Entrypoint is Mandatory. * * @fcp_abort: called to request the LLDD to abort the indicated fcp request. * The call may return before the abort has completed. After aborting * the request, the LLDD must still call the fcp request done routine * indicating an FC transport Aborted status. * Entrypoint is Mandatory. * * @max_hw_queues: indicates the maximum number of hw queues the LLDD * supports for cpu affinitization. * Value is Mandatory. Must be at least 1. * * @max_sgl_segments: indicates the maximum number of sgl segments supported * by the LLDD * Value is Mandatory. Must be at least 1. Recommend at least 256. * * @max_dif_sgl_segments: indicates the maximum number of sgl segments * supported by the LLDD for DIF operations. * Value is Mandatory. Must be at least 1. Recommend at least 256. * * @dma_boundary: indicates the dma address boundary where dma mappings * will be split across. * Value is Mandatory. Typical value is 0xFFFFFFFF to split across * 4Gig address boundarys * * @local_priv_sz: The LLDD sets this field to the amount of additional * memory that it would like fc nvme layer to allocate on the LLDD's * behalf whenever a localport is allocated. The additional memory * area solely for the of the LLDD and its location is specified by * the localport->private pointer. * Value is Mandatory. Allowed to be zero. * * @remote_priv_sz: The LLDD sets this field to the amount of additional * memory that it would like fc nvme layer to allocate on the LLDD's * behalf whenever a remoteport is allocated. The additional memory * area solely for the of the LLDD and its location is specified by * the remoteport->private pointer. * Value is Mandatory. Allowed to be zero. * * @lsrqst_priv_sz: The LLDD sets this field to the amount of additional * memory that it would like fc nvme layer to allocate on the LLDD's * behalf whenever a ls request structure is allocated. The additional * memory area solely for the of the LLDD and its location is * specified by the ls_request->private pointer. * Value is Mandatory. Allowed to be zero. * * @fcprqst_priv_sz: The LLDD sets this field to the amount of additional * memory that it would like fc nvme layer to allocate on the LLDD's * behalf whenever a fcp request structure is allocated. The additional * memory area solely for the of the LLDD and its location is * specified by the fcp_request->private pointer. * Value is Mandatory. Allowed to be zero. */ struct nvme_fc_port_template { /* initiator-based functions */ void (*localport_delete)(struct nvme_fc_local_port *); void (*remoteport_delete)(struct nvme_fc_remote_port *); int (*create_queue)(struct nvme_fc_local_port *, unsigned int qidx, u16 qsize, void **handle); void (*delete_queue)(struct nvme_fc_local_port *, unsigned int qidx, void *handle); int (*ls_req)(struct nvme_fc_local_port *, struct nvme_fc_remote_port *, struct nvmefc_ls_req *); int (*fcp_io)(struct nvme_fc_local_port *, struct nvme_fc_remote_port *, void *hw_queue_handle, struct nvmefc_fcp_req *); void (*ls_abort)(struct nvme_fc_local_port *, struct nvme_fc_remote_port *, struct nvmefc_ls_req *); void (*fcp_abort)(struct nvme_fc_local_port *, struct nvme_fc_remote_port *, void *hw_queue_handle, struct nvmefc_fcp_req *); u32 max_hw_queues; u16 max_sgl_segments; u16 max_dif_sgl_segments; u64 dma_boundary; /* sizes of additional private data for data structures */ u32 local_priv_sz; u32 remote_priv_sz; u32 lsrqst_priv_sz; u32 fcprqst_priv_sz; }; /* * Initiator/Host functions */ int nvme_fc_register_localport(struct nvme_fc_port_info *pinfo, struct nvme_fc_port_template *template, struct device *dev, struct nvme_fc_local_port **lport_p); int nvme_fc_unregister_localport(struct nvme_fc_local_port *localport); int nvme_fc_register_remoteport(struct nvme_fc_local_port *localport, struct nvme_fc_port_info *pinfo, struct nvme_fc_remote_port **rport_p); int nvme_fc_unregister_remoteport(struct nvme_fc_remote_port *remoteport); void nvme_fc_rescan_remoteport(struct nvme_fc_remote_port *remoteport); int nvme_fc_set_remoteport_devloss(struct nvme_fc_remote_port *remoteport, u32 dev_loss_tmo); /* * *************** LLDD FC-NVME Target/Subsystem API *************** * * For FC LLDD's that are the NVME Subsystem role * * ****************************************************************** */ /** * struct nvmet_fc_port_info - port-specific ids and FC connection-specific * data element used during NVME Subsystem role * registrations * * Static fields describing the port being registered: * @node_name: FC WWNN for the port * @port_name: FC WWPN for the port * * Initialization values for dynamic port fields: * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must * be set to 0. */ struct nvmet_fc_port_info { u64 node_name; u64 port_name; u32 port_id; }; /** * struct nvmefc_tgt_ls_req - Structure used between LLDD and NVMET-FC * layer to represent the exchange context for * a FC-NVME Link Service (LS). * * The structure is allocated by the LLDD whenever a LS Request is received * from the FC link. The address of the structure is passed to the nvmet-fc * layer via the nvmet_fc_rcv_ls_req() call. The address of the structure * will be passed back to the LLDD when the response is to be transmit. * The LLDD is to use the address to map back to the LLDD exchange structure * which maintains information such as the targetport the LS was received * on, the remote FC NVME initiator that sent the LS, and any FC exchange * context. Upon completion of the LS response transmit, the address of the * structure will be passed back to the LS rsp done() routine, allowing the * nvmet-fc layer to release dma resources. Upon completion of the done() * routine, no further access will be made by the nvmet-fc layer and the * LLDD can de-allocate the structure. * * Field initialization: * At the time of the nvmet_fc_rcv_ls_req() call, there is no content that * is valid in the structure. * * When the structure is used for the LLDD->xmt_ls_rsp() call, the nvmet-fc * layer will fully set the fields in order to specify the response * payload buffer and its length as well as the done routine to be called * upon compeletion of the transmit. The nvmet-fc layer will also set a * private pointer for its own use in the done routine. * * Values set by the NVMET-FC layer prior to calling the LLDD xmt_ls_rsp * entrypoint. * @rspbuf: pointer to the LS response buffer * @rspdma: PCI DMA address of the LS response buffer * @rsplen: Length, in bytes, of the LS response buffer * @done: The callback routine the LLDD is to invoke upon completion of * transmitting the LS response. req argument is the pointer to * the original ls request. * @nvmet_fc_private: pointer to an internal NVMET-FC layer structure used * as part of the NVMET-FC processing. The LLDD is not to access * this pointer. */ struct nvmefc_tgt_ls_req { void *rspbuf; dma_addr_t rspdma; u16 rsplen; void (*done)(struct nvmefc_tgt_ls_req *req); void *nvmet_fc_private; /* LLDD is not to access !! */ }; /* Operations that NVME-FC layer may request the LLDD to perform for FCP */ enum { NVMET_FCOP_READDATA = 1, /* xmt data to initiator */ NVMET_FCOP_WRITEDATA = 2, /* xmt data from initiator */ NVMET_FCOP_READDATA_RSP = 3, /* xmt data to initiator and send * rsp as well */ NVMET_FCOP_RSP = 4, /* send rsp frame */ }; /** * struct nvmefc_tgt_fcp_req - Structure used between LLDD and NVMET-FC * layer to represent the exchange context and * the specific FC-NVME IU operation(s) to perform * for a FC-NVME FCP IO. * * Structure used between LLDD and nvmet-fc layer to represent the exchange * context for a FC-NVME FCP I/O operation (e.g. a nvme sqe, the sqe-related * memory transfers, and its assocated cqe transfer). * * The structure is allocated by the LLDD whenever a FCP CMD IU is received * from the FC link. The address of the structure is passed to the nvmet-fc * layer via the nvmet_fc_rcv_fcp_req() call. The address of the structure * will be passed back to the LLDD for the data operations and transmit of * the response. The LLDD is to use the address to map back to the LLDD * exchange structure which maintains information such as the targetport * the FCP I/O was received on, the remote FC NVME initiator that sent the * FCP I/O, and any FC exchange context. Upon completion of the FCP target * operation, the address of the structure will be passed back to the FCP * op done() routine, allowing the nvmet-fc layer to release dma resources. * Upon completion of the done() routine for either RSP or ABORT ops, no * further access will be made by the nvmet-fc layer and the LLDD can * de-allocate the structure. * * Field initialization: * At the time of the nvmet_fc_rcv_fcp_req() call, there is no content that * is valid in the structure. * * When the structure is used for an FCP target operation, the nvmet-fc * layer will fully set the fields in order to specify the scattergather * list, the transfer length, as well as the done routine to be called * upon compeletion of the operation. The nvmet-fc layer will also set a * private pointer for its own use in the done routine. * * Values set by the NVMET-FC layer prior to calling the LLDD fcp_op * entrypoint. * @op: Indicates the FCP IU operation to perform (see NVMET_FCOP_xxx) * @hwqid: Specifies the hw queue index (0..N-1, where N is the * max_hw_queues value from the LLD's nvmet_fc_target_template) * that the operation is to use. * @offset: Indicates the DATA_OUT/DATA_IN payload offset to be tranferred. * Field is only valid on WRITEDATA, READDATA, or READDATA_RSP ops. * @timeout: amount of time, in seconds, to wait for a response from the NVME * host. A value of 0 is an infinite wait. * Valid only for the following ops: * WRITEDATA: caps the wait for data reception * READDATA_RSP & RSP: caps wait for FCP_CONF reception (if used) * @transfer_length: the length, in bytes, of the DATA_OUT or DATA_IN payload * that is to be transferred. * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. * @ba_rjt: Contains the BA_RJT payload that is to be transferred. * Valid only for the NVMET_FCOP_BA_RJT op. * @sg: Scatter/gather list for the DATA_OUT/DATA_IN payload data. * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. * @sg_cnt: Number of valid entries in the scatter/gather list. * Valid only for the WRITEDATA, READDATA, or READDATA_RSP ops. * @rspaddr: pointer to the FCP RSP IU buffer to be transmit * Used by RSP and READDATA_RSP ops * @rspdma: PCI DMA address of the FCP RSP IU buffer * Used by RSP and READDATA_RSP ops * @rsplen: Length, in bytes, of the FCP RSP IU buffer * Used by RSP and READDATA_RSP ops * @done: The callback routine the LLDD is to invoke upon completion of * the operation. req argument is the pointer to the original * FCP subsystem op request. * @nvmet_fc_private: pointer to an internal NVMET-FC layer structure used * as part of the NVMET-FC processing. The LLDD is not to * reference this field. * * Values set by the LLDD indicating completion status of the FCP operation. * Must be set prior to calling the done() callback. * @transferred_length: amount of DATA_OUT payload data received by a * a WRITEDATA operation. If not a WRITEDATA operation, value must * be set to 0. Should equal transfer_length on success. * @fcp_error: status of the FCP operation. Must be 0 on success; on failure * must be a NVME_SC_FC_xxxx value. */ struct nvmefc_tgt_fcp_req { u8 op; u16 hwqid; u32 offset; u32 timeout; u32 transfer_length; struct fc_ba_rjt ba_rjt; struct scatterlist *sg; int sg_cnt; void *rspaddr; dma_addr_t rspdma; u16 rsplen; void (*done)(struct nvmefc_tgt_fcp_req *); void *nvmet_fc_private; /* LLDD is not to access !! */ u32 transferred_length; int fcp_error; }; /* Target Features (Bit fields) LLDD supports */ enum { NVMET_FCTGTFEAT_READDATA_RSP = (1 << 0), /* Bit 0: supports the NVMET_FCPOP_READDATA_RSP op, which * sends (the last) Read Data sequence followed by the RSP * sequence in one LLDD operation. Errors during Data * sequence transmit must not allow RSP sequence to be sent. */ }; /** * struct nvmet_fc_target_port - structure used between NVME-FC transport and * a LLDD to reference a local NVME subsystem port. * Allocated/created by the nvme_fc_register_targetport() * transport interface. * * Fields with static values for the port. Initialized by the * port_info struct supplied to the registration call. * @port_num: NVME-FC transport subsytem port number * @node_name: FC WWNN for the port * @port_name: FC WWPN for the port * @private: pointer to memory allocated alongside the local port * structure that is specifically for the LLDD to use. * The length of the buffer corresponds to the target_priv_sz * value specified in the nvme_fc_target_template supplied by * the LLDD. * * Fields with dynamic values. Values may change base on link state. LLDD * may reference fields directly to change them. Initialized by the * port_info struct supplied to the registration call. * @port_id: FC N_Port_ID currently assigned the port. Upper 8 bits must * be set to 0. * @port_state: Operational state of the port. */ struct nvmet_fc_target_port { /* static/read-only fields */ u32 port_num; u64 node_name; u64 port_name; void *private; /* dynamic fields */ u32 port_id; enum nvme_fc_obj_state port_state; } __aligned(sizeof(u64)); /* alignment for other things alloc'd with */ /** * struct nvmet_fc_target_template - structure containing static entrypoints * and operational parameters for an LLDD that supports NVME * subsystem behavior. Passed by reference in port * registrations. NVME-FC transport remembers template * reference and may access it during runtime operation. * * Subsystem/Target Transport Entrypoints/Parameters: * * @targetport_delete: The LLDD initiates deletion of a targetport via * nvmet_fc_unregister_targetport(). However, the teardown is * asynchronous. This routine is called upon the completion of the * teardown to inform the LLDD that the targetport has been deleted. * Entrypoint is Mandatory. * * @xmt_ls_rsp: Called to transmit the response to a FC-NVME FC-4 LS service. * The nvmefc_tgt_ls_req structure is the same LLDD-supplied exchange * structure specified in the nvmet_fc_rcv_ls_req() call made when * the LS request was received. The structure will fully describe * the buffers for the response payload and the dma address of the * payload. The LLDD is to transmit the response (or return a non-zero * errno status), and upon completion of the transmit, call the * "done" routine specified in the nvmefc_tgt_ls_req structure * (argument to done is the ls reqwuest structure itself). * After calling the done routine, the LLDD shall consider the * LS handling complete and the nvmefc_tgt_ls_req structure may * be freed/released. * Entrypoint is Mandatory. * * @fcp_op: Called to perform a data transfer or transmit a response. * The nvmefc_tgt_fcp_req structure is the same LLDD-supplied * exchange structure specified in the nvmet_fc_rcv_fcp_req() call * made when the FCP CMD IU was received. The op field in the * structure shall indicate the operation for the LLDD to perform * relative to the io. * NVMET_FCOP_READDATA operation: the LLDD is to send the * payload data (described by sglist) to the host in 1 or * more FC sequences (preferrably 1). Note: the fc-nvme layer * may call the READDATA operation multiple times for longer * payloads. * NVMET_FCOP_WRITEDATA operation: the LLDD is to receive the * payload data (described by sglist) from the host via 1 or * more FC sequences (preferrably 1). The LLDD is to generate * the XFER_RDY IU(s) corresponding to the data being requested. * Note: the FC-NVME layer may call the WRITEDATA operation * multiple times for longer payloads. * NVMET_FCOP_READDATA_RSP operation: the LLDD is to send the * payload data (described by sglist) to the host in 1 or * more FC sequences (preferrably 1). If an error occurs during * payload data transmission, the LLDD is to set the * nvmefc_tgt_fcp_req fcp_error and transferred_length field, then * consider the operation complete. On error, the LLDD is to not * transmit the FCP_RSP iu. If all payload data is transferred * successfully, the LLDD is to update the nvmefc_tgt_fcp_req * transferred_length field and may subsequently transmit the * FCP_RSP iu payload (described by rspbuf, rspdma, rsplen). * If FCP_CONF is supported, the LLDD is to await FCP_CONF * reception to confirm the RSP reception by the host. The LLDD * may retramsit the FCP_RSP iu if necessary per FC-NVME. Upon * transmission of the FCP_RSP iu if FCP_CONF is not supported, * or upon success/failure of FCP_CONF if it is supported, the * LLDD is to set the nvmefc_tgt_fcp_req fcp_error field and * consider the operation complete. * NVMET_FCOP_RSP: the LLDD is to transmit the FCP_RSP iu payload * (described by rspbuf, rspdma, rsplen). If FCP_CONF is * supported, the LLDD is to await FCP_CONF reception to confirm * the RSP reception by the host. The LLDD may retramsit the * FCP_RSP iu if FCP_CONF is not received per FC-NVME. Upon * transmission of the FCP_RSP iu if FCP_CONF is not supported, * or upon success/failure of FCP_CONF if it is supported, the * LLDD is to set the nvmefc_tgt_fcp_req fcp_error field and * consider the operation complete. * Upon completing the indicated operation, the LLDD is to set the * status fields for the operation (tranferred_length and fcp_error * status) in the request, then call the "done" routine * indicated in the fcp request. After the operation completes, * regardless of whether the FCP_RSP iu was successfully transmit, * the LLDD-supplied exchange structure must remain valid until the * transport calls the fcp_req_release() callback to return ownership * of the exchange structure back to the LLDD so that it may be used * for another fcp command. * Note: when calling the done routine for READDATA or WRITEDATA * operations, the fc-nvme layer may immediate convert, in the same * thread and before returning to the LLDD, the fcp operation to * the next operation for the fcp io and call the LLDDs fcp_op * call again. If fields in the fcp request are to be accessed post * the done call, the LLDD should save their values prior to calling * the done routine, and inspect the save values after the done * routine. * Returns 0 on success, -<errno> on failure (Ex: -EIO) * Entrypoint is Mandatory. * * @fcp_abort: Called by the transport to abort an active command. * The command may be in-between operations (nothing active in LLDD) * or may have an active WRITEDATA operation pending. The LLDD is to * initiate the ABTS process for the command and return from the * callback. The ABTS does not need to be complete on the command. * The fcp_abort callback inherently cannot fail. After the * fcp_abort() callback completes, the transport will wait for any * outstanding operation (if there was one) to complete, then will * call the fcp_req_release() callback to return the command's * exchange context back to the LLDD. * Entrypoint is Mandatory. * * @fcp_req_release: Called by the transport to return a nvmefc_tgt_fcp_req * to the LLDD after all operations on the fcp operation are complete. * This may be due to the command completing or upon completion of * abort cleanup. * Entrypoint is Mandatory. * * @defer_rcv: Called by the transport to signal the LLLD that it has * begun processing of a previously received NVME CMD IU. The LLDD * is now free to re-use the rcv buffer associated with the * nvmefc_tgt_fcp_req. * Entrypoint is Optional. * * @discovery_event: Called by the transport to generate an RSCN * change notifications to NVME initiators. The RSCN notifications * should cause the initiator to rescan the discovery controller * on the targetport. * * @max_hw_queues: indicates the maximum number of hw queues the LLDD * supports for cpu affinitization. * Value is Mandatory. Must be at least 1. * * @max_sgl_segments: indicates the maximum number of sgl segments supported * by the LLDD * Value is Mandatory. Must be at least 1. Recommend at least 256. * * @max_dif_sgl_segments: indicates the maximum number of sgl segments * supported by the LLDD for DIF operations. * Value is Mandatory. Must be at least 1. Recommend at least 256. * * @dma_boundary: indicates the dma address boundary where dma mappings * will be split across. * Value is Mandatory. Typical value is 0xFFFFFFFF to split across * 4Gig address boundarys * * @target_features: The LLDD sets bits in this field to correspond to * optional features that are supported by the LLDD. * Refer to the NVMET_FCTGTFEAT_xxx values. * Value is Mandatory. Allowed to be zero. * * @target_priv_sz: The LLDD sets this field to the amount of additional * memory that it would like fc nvme layer to allocate on the LLDD's * behalf whenever a targetport is allocated. The additional memory * area solely for the of the LLDD and its location is specified by * the targetport->private pointer. * Value is Mandatory. Allowed to be zero. */ struct nvmet_fc_target_template { void (*targetport_delete)(struct nvmet_fc_target_port *tgtport); int (*xmt_ls_rsp)(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_ls_req *tls_req); int (*fcp_op)(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq); void (*fcp_abort)(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq); void (*fcp_req_release)(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq); void (*defer_rcv)(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq); void (*discovery_event)(struct nvmet_fc_target_port *tgtport); u32 max_hw_queues; u16 max_sgl_segments; u16 max_dif_sgl_segments; u64 dma_boundary; u32 target_features; u32 target_priv_sz; }; int nvmet_fc_register_targetport(struct nvmet_fc_port_info *portinfo, struct nvmet_fc_target_template *template, struct device *dev, struct nvmet_fc_target_port **tgtport_p); int nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *tgtport); int nvmet_fc_rcv_ls_req(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_ls_req *lsreq, void *lsreqbuf, u32 lsreqbuf_len); int nvmet_fc_rcv_fcp_req(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq, void *cmdiubuf, u32 cmdiubuf_len); void nvmet_fc_rcv_fcp_abort(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *fcpreq); #endif /* _NVME_FC_DRIVER_H */